Plastic Electric Lab Laboratory Centrifuge Machine Lab Medical Practice

Description

Features
Has a maximum capacity of 6 x 20ml and a maximum speed of 4000rpm, making it a great choice for low volume sample separation.
Intended as a worktop centrifuge
Compact and quiet enough to install in an office or classroom as well as in laboratories and medical settings
The speed dial ranges from 0-4000rpm and it has a 0 to 60 minute timer.
Safe, compact and quiet to use
Ideal for home and educational settings
Specifications
Model:800-1
Maximum speed:4000r/min
Capacity:20ml×6
Maximum relative Centrifugal force:1790×g
Time rang:0~60min.or without limit
Electric current: AC 110V 60 HZ
Operation
Put the machine on a level and strong table and keep the working room clear, dry and ventilated.
Indoor temperture5- 32℃ is ok Open the power supply and make sure the indicator lamp is light.
Open the cover of the machine, clear the rotor and container.
Put the test tube (with same weight) into the machine.
Put down the cover of the machine .
Adjust the timer as your requirement.
Switch ON the power. Adjust the governor as you requirement.
Before you are going to stop the work, you should adjust the governor to "0" first, and then clean the container and rotor.
Safety Warning
After you open the power switch, please shut the power supply and make an examination if the indicators not light Do not operate the machine the machine without rotor . When you are going to operate the machine, you should make the rotor is not corroded/hurt. Do not open the cover of the machine and touch the rotor when the rotor when the rotor is in moving. Do not operate the machine if the rotor is not balance assembled.