Awareness Ribbons Pair Leather Emboss Plates 2 3/8" x 3 1/8" & 1" x 1 3/8"

Description

These plates would help to show support for a wide array of causes.  The color of each ribbon identifies the cause supported.
The sizes are 2 3/8" x 3 1/8" and 1" x 1 3/9 and are
made of a high impact fiberglass reinforced polyurethane.  We originally started making these plates to use on short runs where we only needed a few hundred impressions BUT we soon discovered that they were outlasting any of the plates made of printers metal and have much greater detail than most cast metal plates.
For more information about the polyurethane embossing plates and their full warranty you can visit the  bunkhousetools web site.
The samples were made using a 12 ton hydraulic shop press which is more than sufficient for plates of this size or even slightly larger.
These plates are not hammer stamps and should be pressed in using a hydraulic press, clicker press, or a shop press like we do but the pressure plate must cover the entire top of the plate or if you are using a ram press a heavy piece of flat steel sufficient to cover the entire top of the emboss plate will be necessary.
You might check our other auctions because we've got several other leather working items listed and we will list more.  If you're lucky enough to get more than one item, we'll gladly combine shipment as best we can and we aren't charging anything for packaging and handling.
If you have any questions, please feel free to ask, it helps me because there might be something I forgot to mention, but please do so before you bid.
All we want are happy buyers.  In the unlikely event there's a problem when you receive this item, contact us before you leave feedback and we'll do what we can to resolve the problem.  We'll take back any item that is not exactly as we represented it but only if you contact us before you leave feedback.